![inkscape app for iphone inkscape app for iphone](https://images.sftcdn.net/images/t_app-cover-l,f_auto/p/ca373000-96d1-11e6-b380-00163ec9f5fa/695357031/inkscape-screenshot.jpg)
![inkscape app for iphone inkscape app for iphone](https://images.sftcdn.net/images/t_app-logo-l,f_auto,dpr_auto/p/7704af4e-99eb-11e6-9d05-00163ed833e7/3146107407/inkscape-logo.jpg)
See engraving_over_200mm_x_140mm.mp4 and engraving_over_200mm_x_140mm.jpg for a demo. Although LaserPecker L1 (not Pro) is capable of engraving a much larger area, from (-100,-70) to (100,70) as I manually tested, it is limited to 100mm x 100mm by the App and the machine to minimise distortion and ensure consistent engraving quality. the absolute coordinates range from (-50,-50) to (50,50). The origin (0,0) is in the centre of the 100mm x 100mm engraving area.This extension warns if the target graphics are larger than 100mm x 100mm, and you should scale it down and try again.Engraving area is limited to 100mm x 100mm in size.(0=off, which makes the Gcode useless, so I disallowed it.) Laser power can be set from 1 (min) to 255 (max).I tested speeds from 0.01 to 70mm/min and they all came out the same on the engraver end. Lowest laser speed is limited to 70mm/min, as this is the lowest effective speed that LaserPecker App allows.Laser head idle movement speed is hard-coded to 3000mm/min, as this is what's used in LaserPecker's official sample Gcode files.
![inkscape app for iphone inkscape app for iphone](https://images.sftcdn.net/images/t_app-logo-l,f_auto/p/7704af4e-99eb-11e6-9d05-00163ed833e7/3146107407/inkscape-logo.jpg)
#INKSCAPE APP FOR IPHONE GENERATOR#
Restart Inkscape and you should be able to access the extension from Extensions > LaserPecker > Gcode Generator for L1/Pro/L2.For Windows: C:\Program Files\Inkscape\share\inkscape\extensions\.For Mac: Launch Inkscape > Preferences > System > Look for User extensions > click Open.For Linux: ~/.config/inkscape/extensions/.Depending on your Inkscape version and operating system, download laserpecker.inx and laserpecker.py from extension/ / directory into.